next3dp-f123-material-unlock-software.png
next3dp-f123-material-unlock-software_before.png
next3dp-f123-material-unlock-software_after.png

F123® Printer-Side EEPROM & Material Unlock

US$995.00

  • 1-Minute USB Activation: Apply the unlock in about 1 minute and restore the material workflow on the printer.

  • Printer-Side Software Unlock: Enables compatible and refill material workflows without an external EEPROM writer or powered material-bay dongle.

  • F123 Series Compatible: Supports F120, F170, F270, F370 and F370CR printer configurations.

  • Material Quantity Freedom: Continue using suitable compatible material beyond the standard electronically tracked material quantity.

  • No Added Hardware: Nothing needs to remain connected to the printer or material bay.

  • Printer-Specific Setup: Supplied for one printer serial number with simple USB installation instructions.

  • US$995 Per Printer: Printer model, serial number and current software version are confirmed before delivery.

Before checkout: Enter your printer model, serial number and current software version.
Example serial number: D00522

After purchase: NEXT 3DP confirms emails the printer-specific unlock package with USB instructions.

  • 1-Minute USB Activation: Apply the unlock in about 1 minute and restore the material workflow on the printer.

  • Printer-Side Software Unlock: Enables compatible and refill material workflows without an external EEPROM writer or powered material-bay dongle.

  • F123 Series Compatible: Supports F120, F170, F270, F370 and F370CR printer configurations.

  • Material Quantity Freedom: Continue using suitable compatible material beyond the standard electronically tracked material quantity.

  • No Added Hardware: Nothing needs to remain connected to the printer or material bay.

  • Printer-Specific Setup: Supplied for one printer serial number with simple USB installation instructions.

  • US$995 Per Printer: Printer model, serial number and current software version are confirmed before delivery.

Before checkout: Enter your printer model, serial number and current software version.
Example serial number: D00522

After purchase: NEXT 3DP confirms emails the printer-specific unlock package with USB instructions.

Simple Printer-Side Activation

Unlock the F123 material workflow in about one minute.

No external EEPROM writer. No powered material-bay dongle. The NEXT 3DP unlock is supplied specifically for your printer and applied directly from USB.

01

Select Your Printer

Choose your F123 model and enter the printer serial number when adding the unlock to your cart.

02

Receive Your Unlock

NEXT 3DP prepares the printer-specific software package and supplies the USB installation instructions.

03

Apply From USB

Run the supplied unlock procedure on the printer. Activation takes approximately one minute.

Compatibility

Built for the F123 platform.

  • Supported printers: F120, F170, F270, F370 and F370CR
  • Software requirement: Stratasys F123 software version 2.9.5990
  • License: One purchase covers one printer serial number
  • Hardware: No external EEPROM writer or powered material-bay device required
  • F770: Offered separately due to its different material configuration
F120 F170 F270 F370 F370CR

After A Full Reboot

Just reapply the USB unlock.

≈ 1 MIN
Typical Reapplication

If the printer is fully rebooted, simply run the supplied USB procedure again. No additional purchase or external hardware is required.

Need More Detail?

See the F123 material unlock working on a real printer.

View the full NEXT 3DP F123 unlock page for before-and-after printer screens, workflow details and additional information.

View F123 Unlock Details

NEXT 3DP is independently operated and is not affiliated with, endorsed by, or authorized by Stratasys Ltd. Product and model names are used for identification and compatibility purposes.